On this battlefield of life and death, the surgical light plays a crucial role. It is like the "second pair of eyes" of the surgeon, providing uniform and shadow-free high-brightness illumination, and is an indispensable companion for precise surgeries. Hunan Mplent Optoelectronics fully understands that ensuring the surgical light is always in the best condition is the foundation for ensuring the safety and efficient operation of the surgery. Today, we will introduce the maintenance points of the surgical light to you.

Daily maintenance, standardization is key:

1.Post-operative cleaning and disinfection: After each surgery, a 70%-80% ethanol solution must be used to wipe and disinfect the outer surface of the shadowless lamp (including the handle covering area, but the light-emitting surface must be avoided), for a total of two times, with a duration of at least 3 minutes. Remember: Before cleaning, make sure to cut off the power supply first to prevent liquid from entering the lamp body!

2.Selection of cleaning tools: Use soft cloth or sponge for gentle wiping. Do not use hard bristle brushes, steel wire brushes, banana water, acid-base solvents, etc., to avoid scratching or corroding the lamp body shell.

3.Light transmission maintenance: Regularly use medical gauze to clean the surface of the front cover glass, remove dust, and ensure the best illumination and uniformity.

Regular inspections, professional escort:

Hunan Mplent emphasizes that the shadowless lamps need to be inspected by professional maintenance personnel on a regular basis (suggested every two months). The core items include:

• The condition of the ceiling installation fasteners
• The condition of the fasteners at each connection point
• Whether the circuit contacts are good
• The flexibility of each movable part
• Whether the control operation is accurate

The inspection should be recorded. If any problems are found, they should be dealt with promptly according to the manual or contacted the professional service team of Mplent immediately to avoid "working with faults".

Special care in summer, moisture prevention is the key:

The high temperature and high humidity in summer pose a severe challenge to the shadowless lamps:

1.Ventilation and heat dissipation: When conditions permit, set up ventilation holes around the ceiling to facilitate the heat dissipation of the core components.

Equipment moisture prevention: When the weather is humid, let the built-in cameras and other electronic devices enter the standby state regularly.

2.Dust removal and leakage prevention: Special attention should be paid to components with external interfaces (small holes), such as the external camera system. Professional personnel can regularly use a cold air blower with the low-speed setting, carefully blowing through these holes to remove internal dust and moisture, preventing condensation and the combination of dust and moisture from causing leakage risks.

Hunan Mplent Optoelectronics not only strives to provide high-quality surgical lighting equipment, but also is willing to be your reliable equipment maintenance partner. Follow the above guidelines and contact our professional service team regularly for maintenance and upkeep. Together, let's safeguard this crucial "light of life" and ensure the safety of every surgery!